Home » 6-cia » 6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D

6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D
6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D
6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D
6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D
6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D
6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D

6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D
Little Giant 6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral Diaphragm Switch, 10-Ft. AUTOMATIC SUBMERSIBLE SUMP PUMP: with integral diaphragm switch activates when water reaches 7 to 10 inches and shuts off when water drops down between 1 and 4 inches. BUILT TO LAST: Epoxy-coated cast iron housing; non-clog vortex style impeller; upper and lower bearings; nitrile/carbon/ceramic mechanical shaft seal. CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada. APPLICATIONS: designed for sump pump systems and general water transfer application; must sit in water to activate the switch. SPECIFICATIONS: 1/3 HP; 115 Volts; 50/60 Hz; 9.0 running Amps; 14.3 starting Amps; 720 Watts; 2760 GPH at 5-ft. Shut-off; 7.8 PSI; 10-ft. Cord; 1.5-inch FNPT discharge. 6-CIA Sump Pump with Integral Diaphragm Switch and 10 Foot Cord. For basement sump systems, dewatering and water transfer. The Little Giant 1/3 HP, 115-Volt, 2760 GPH 6-CIA cast iron sump pump is designed for use in sump systems which handle average water volumes and comes with a built-in diaphragm switch. This pump turns on when water reaches 7 to 10 inches and shuts off when water drops between 1 and 4 inches. The Little Giant 6-CIA has a 1.5-inch FNPT discharge and a screened intake. 2760 GPH at 5 Ft. 115-Volt thermally protected CSA certified shaded pole motor with 10-Ft. 9.0 Amps, 720 Watts. Designed for continuous duty. Built-in Diaphragm Switch: On at 7 to 10 inches; Off at 1 to 4 inches.
6-CIA 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Integral D