Home »
Posts tagged "switch" (Page 6)
1/2 HP Submersible Water Sump Pump with Built-In Float Switch for Clean. 68.63 Gallons Per Minute. 15.71 x 9.37 x 7.24 inches. 1/2 HP; Maximum flow rate is 4118 gallons per hour; Ability to lift water from 23ft maximum submersible depth to 23ft high. Built-in automatic ON/OFF switch,...
Continue reading »
February 4, 2024 admin
submersible
Sump Pump cannot keep up with the amount of water coming into the sump or the sump is not working. Your Sump Alarm water/septic alarm system is built to weather any storm. Monitor your Sump Alarm device on the Sump Alarm’s website.
Continue reading »
January 28, 2024 admin
sump
It is also great for pool changing water work with its 16.5-feet heavy-duty power cord. The working principle of the water pump is that the float switch goes down vertically, the beads inside are stuck on the line under the float switch, and the water pump starts automatically.
Continue reading »
January 24, 2024 admin
3700gph
1HP high power for efficient pumping. Whether you need continuous operation or automatic ON/OFF mode, this pump has you covered. Working principle: float switch goes down vertically, beads inside get stuck on the line, and pump starts automatically.
Continue reading »
January 21, 2024 admin
submersible
Float Switch Tested To 1 Million Cycles. Top Suction Design Eliminates Air Locks And Clogging From Debris In Bottom Of Sump Pit. Epoxy-Coated Steel Motor Housing And Corrosion Resistant, Thermoplastic Pump Base.
Continue reading »
January 19, 2024 admin
wayne
Equipped with a high-efficiency split capacitor motor, producing 1HP power. With its corrosion-resistant thermoplastic body and multiple hose adapters, this pump is built to last and can handle various water conditions.
Continue reading »
January 17, 2024 admin
submersible
1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11 Diameter Or Larger Sump Basin.
Continue reading »
January 16, 2024 admin
wayne
Upper and lower heavy duty ball bearings construction. The shaft is hard coated 400 series stainless for improved corrosion resistance. The motor is permanently lubricated for extended service life and is powered for continuous operation.
Continue reading »
January 12, 2024 admin
goulds
Upper and lower heavy duty ball bearings construction. The shaft is hard coated 400 series stainless for improved corrosion resistance. The motor is permanently lubricated for extended service life and is powered for continuous operation.
Continue reading »
January 11, 2024 admin
goulds
Unique switchable operation mode: You can directly insert the sensor switch to manual mode hole to use this item as a manual pump for permanent working until plug off or pull the sensor out; You can also use the sensor switch as AUTO pump for continual operation by...
Continue reading »
January 7, 2024 admin
green
