JABSCO #18660-0123 Marine WATER PUPPY Bilge/Sump Flexible Impeller Pump /6.3 GPH
The Nitrile impeller in this pump is good for oil-based products, and has a Temperature limit of 50 degrees to 180 degrees F (10 degrees to 82 degrees C). This pump is for general transfer pumping where self-priming, 6.3 GPM (24 LPM) flow, and debris tolerance are required. Do not run dry. These flexible impeller pumps must NOT be run dry, as the pumped liquid is the lubricant for the impeller. Observe the outlet and shut off pump as soon as liquid stops flowing. An automatic level switch is convenient to control the pump. The pump cannot run against a closed outlet such as encountered when using a garden hose type shut-off nozzle. Pressure for normal operation should not exceed 20 feet of head (8.7 psi). Motor meets USCG Electrical Standards 183.410 and ISO 8846 MARINE for IGNITION PROTECTION on gasoline powered vessels. Do not pump gasoline, solvents, thinners or other flammable liquids. If it is NOT pictured or mentioned in the ad, it is NOT included with this item for sale! ENLARGE pictures for a better view! We have an automated feedback system that leaves feedback after it is received.