100% Satisfaction Satisfaction Guaranteed. FLUENTPOWER 3/4HP Submersible Sump Pump, 3300GPH Stainless Steel Utility Water Pump, Manual Control with 26-Foot Cord for Pool Tub Garden Pond Basement Flood Cellar Draining. 55 Gallons Per Minute. 5.9″L x 5.9″W x 9.4H. GHT 3/4″, NPT 1″ and 1.5 male tread connectors. 5.9 “h x 5.9 “h x 9.4 h. Weight: 10.0 lb. ? 3/4 HP HIGH EFFICIENCY? Equipped with a 3/4 HP powerful motor, the capacity of transferring water can be Max. 3300 GPH with 1.25 discharge hose horizontally. Pump has the ability to lift water up to Max. 28 ft vertical, 2200 gallons per hour on at 10 ft discharge lift. This utility pump works with CLEAN water which contains small solid less than 0.2. ? FULL STAINLESS STEEL CASING? Assembled by integrated 304 stainless steel housing and pump base with better cooling ability for long life. Pump also comes with a 26.2 ft long cable cord and a 26 ft nylon rope, which allows the pump to go deep enough (23 ft) in the water. This pump can be used in the Min 7″x7″ pit. ? SIMPLE PLUG-IN CONTROL? The pump ON/OFF is controlled by cable plug. It can start pumping water from 2″ down to 0.4″. Designed for quickly draining water in hot tubs, water tanks, rain barrels, swimming pools, garden ponds, wells and so on. ? SAFETY ENSURE & STURDY? Oil-Filled Seal Structure gives pump longer duration, which is much longer than regular mechanical seal. Full corrosion-resistant shell and thermal protection ensures the pump will not be burned out, even when the pump triggers the thermal overload protector, the pump will rework after cooling down. ? EASY TO INSTALL? Comes with three plastic adapters: GHT 3/4″, NPT 1″ and 1.5 male thread connectors. GHT 3/4″+NPT 1″ connects standard garden hose for quick installation; 1.5 discharge port connects discharge hose for maximum output flow rate. Multiple hose adapters help you get the pump started much easier. It also has enough pressure to be connected with a sprayer for garden irrigation. Minimum Water for Manual Start. The pump ON/OFF is controlled by cable plug. Please make sure never to let the pump become dry running! Clean Water Utility Pump. The pump is designed to work with ONLY clean water. Its Maximum solid passage is 0.2. Don’t use the pump for any. Salt water, chemical or acid liquid. It may reduce the lifetime of the pump. The maximum output with 1.25 discharge port is 3300 GPH horizontally. We always suggest to use biggest discharge port and larger hose in order to have optimum performance! Gives pump longer duration, which is much longer than regular mechanical seal. Ensures that the pump will not be burned out. Even when the pump triggers the thermal overload protector, the pump will rework after cooling down. Easy to Use in Small Sump Pit. Pump Dimension: L 5.9″ x W 5.9″ x H 9.4. You can put the pump into the narrow pit more than. User Friendly and Simple Operation. A lightweight and compact design makes the pump easy to store and carry. Perfect for household and utility applications of transferring water from one place to another. Pumping water from Hot Tub or Swimming Pool. Draining water from Garden Ponds for lawn irrigation. Moving slightly dirty water from the Fish Tank. Draining water from the Flooding Areas. Before starting, tilt the pump to remove all air and wait 15 seconds. The bigger the flow, the wider the outlet should be. For greater flow, the water height should be lower. Also, use the 1.25 discharge port. If the water level is not high enough to start, please try your pump with a higher water level. 4.3 out of 5 stars. 5.0 out of 5 stars. 4.2 out of 5 stars. GHT 3/4″, NPT 1″ and 1.5 male thread. GHT 3/4″, NPT 1″ and 1.25 male thread. We guarantee against any defective or misrepresented products.