Home »
Posts tagged "18660-0123"
The Nitrile impeller in this pump is good for oil-based products, and has a Temperature limit of 50 degrees to 180 degrees F (10 degrees to 82 degrees C). This pump is for general transfer pumping where self-priming, 6.3 GPM (24 LPM) flow, and debris tolerance are required....
Continue reading »
February 5, 2024 admin
jabsco
The Nitrile impeller in this pump is good for oil-based products, and has a Temperature limit of 50 degrees to 180 degrees F (10 degrees to 82 degrees C). This pump is for general transfer pumping where self-priming, 6.3 GPM (24 LPM) flow, and debris tolerance are required....
Continue reading »
November 22, 2022 admin
jabsco
1/2″ Internal Pipe Threads, 1″ External Hose Barb Adapter for 3/4 External Garden Hose Thread included. 23.8 Litres/min (6.3 US gallons/min). 12V Permanent magnet type, fully enclosed, stainless steel shaft. Motor meets USCG Electrical Standards 183.410 and ISO 8846 MARINE for IGNITION PROTECTION on gasoline powered vessels. This...
Continue reading »
November 22, 2022 admin
jabsco
Holsters, Belts & Pouches. Scopes Optics & Lasers. Gun Smithing & Maintenance. Baits, Lures & Flies. Clothing, Shoes & Accessories. Use for bilge pumping, live well circulation, wash down and general pumping requirements. If bilge water contains significant amount of oil, the standard impeller should be replaced with...
Continue reading »
July 22, 2022 admin
jabsco
